7960 Class I LED

7960 Series SAE Class I LED

ECCO's 7960 Series LED Beacons feature 8 of the latest high intensity 3 watt LEDs providing SAE Class I light output. Double or quad flash operation and hi/lo intensity control combined with a long maintenance free service life and low amp draw make this beacon the perfect choice for both on and off-road applications. Easily replaces old rotating or strobe beacons with the latest technology so no ongoing maintenance is required.

Features

• Eight 3-watt LEDs provide unrivaled flash intensity
• Double or quad flash operation with hi/lo intensity control
• Die cast aluminum base is coated against corrosion and designed for vibration resistance and heat dissipation. Permanent mount models are sealed in epoxy for added protection
• Thread on polycarbonate lens allows easy flash mode selection without tools
• Reverse polarity, voltage spike and surge protected
• 5 year warranty
• Temperature Range: -22 F to +122 F (-30 C to +50 C)
• Coated aluminum heat sink is specifically designed to efficiently dissipate heat from the LED throughout the entire beacon base.
• Eight high intensity, LEDs provide 360 degree SAE Class I light output on 7960 model, Class II on 7940 model.
• Circuit board mounted micro switch allows easy flash pattern and light intensity selection.
• 17ft cord with cigar plug.
• on/off switch on cigar plug

Approvals

• AMECA certified to SAE J845 Class I (amber and red only, blue and clear = Class II)
• CE, e